Can the Ashford Formula be used in conjunction with bond-breakers on tilt-up construction?

Yes. Curecrete has letters from many bondbreaker manufacturers certifying that their products will work well on Ashford Formula treated casting beds.  The Ashford Formula should be applied to the floor/casting bed at the time of placement.  The bondbreaker can then be applied later per usual procedures.  Another option is to cure the slab with a dissipating curing agent, apply the bondbreaker, lift the panels thoroughly, strip and clean the floor, then apply the Ashford Formula.

Note: The Ashford Formula must be applied to clean, bare concrete so that it can penetrate.  Bond-breakers and/or curing agents must be thoroughly and completely removed from the floor before the Ashford Formula is applied.