801.489.5663
RetroGuard™
RetroGuard™ provides ultimate stain and etch protection with a high gloss finish. This topical coating is ideal for protecting concrete and terrazzo against staining. When a spill occurs, RetroGuard’s layer of protective properties prevent the floor from immediate damage and increases the window of opportunity for clean-up.
BENEFITS & ADVANTAGES
- Ultimate stain and etch protection
- Topical sealer
- Strong floor adhesion; does not peel or flak
- Creates high gloss and shine when burnished; cures without burnishing
- Enhances floor color including dyes and aggregate
- UV stable; may be used outdoors
- Can be re-applied anytime; does not require stripping
- Creates sacrificial layer between spill and floor
- Reduces expensive and time consuming stain repair
- Ideal for all Ashford Formula and RetroPlate treated floors – new or old, standard or colored – and all concrete and terrazzo floors
Contact your local sales representative to get your product!
RetroPel™
RetroPel™ is an oil and water repellent specifically formulated for concrete and terrazzo floors. It prevents oil from penetrating the floor and water reactions that cause whiting.
Newly densified and polished floors remain susceptible to water and oil penetration because the densification process (which aids in mitigating stains) hasn’t been fully achieved. The majority of this process is achieved within the first 48 hours, but continues for up to 6 months. RetroPel provides repellency during this critical phase.
RetroPel has been formulated with advanced, water-based fluoropolymers. These small molecular structures allow for maximum penetration. It is not a topical sealer, but rather, a penetrating sealer that fills the microscopic gaps in the floor’s crystalline structure. It does not change the appearance of the floor.
BENEFITS & ADVANTAGES
- Penetrating sealer that fills microscopic gaps in the floor
- Protects newly densified and polished floors from water
- reactions that cause whiting
- Does not affect the appearance of the floor
- Easy, stress-free application; less applicator fatigue
- Does not require burnishing to cure
- Ideal for all Ashford Formula and RetroPlate treated floors – new or old, standard or colored – and all concrete and terrazzo
Contact your local sales representative to get your product!
SaltSlayer™
SaltSlayer™ is a silane that provides salt and water repellency to concrete and masonry. Silane reacts with the silica in concrete, and is therefore ideal for use on concrete floors which require additional repellency against salt-bearing water.
BENEFITS & ADVANTAGES
- Complete water and salt repellency
- Easy to use; single pass spray application
- Minimal masking, overspray or clean-up required
- No change in texture or skid resistance
- Does not alter the appearance of the application surface
- Penetrating sealer
- Fast acting; floors open to traffic within 20-45 minutes following treatment
- Low susceptibility to UV light
- Helps stop efflorescence
- Compatible with solvent-based surface treatments (i.e. striping paint)
- Does not affect vapor permeability
- Ideal for all Ashford Formula™ and RetroPlate® treated floors – new or old, standard or colored – and all concrete and terrazzo floors
IDEAL USES
- Bus Garages
- Parking Decks
- Car Service Bays
Contact your local sales representative to get your product!
