Coors / M&M Distributing

Beverage/Warehouse/Distribution | Salt Lake City, UT, USA

“When we built our new warehouse facility we had our concrete floors treated with Ashford Formula to dustproof, seal, and harden them. Our primary concern at the time, however, was to make them as abrasion resistant as possible. We have found over the last three years that there has been absolutely no deterioration of the floor. The sliding of the (forklift) blade across the floor has had no detrimental effect on the surface. Our problem now is that periodically we have to have the underside of the forklift blade renewed as the tungsten steel blade wears away instead of the floor.”

Tony Perri
Operations Manager

General Dynamics Convair Division

Aviation/Manufacturing | San Diego, CA, USA

“We have found that Ashford Formula is permanent and have never had to reseal any treated floor. We have also found that there is no dusting, rutting, or pitting of the concrete. This is remarkable, considering the weight of the enormous pieces of equipment used in this plant. As a new piece of equipment is introduced into the production line, it is necesary to move many of the existing pieces of equipment. This movement necessitates the cutting of the floors in some areas for the installation of new pipes and equipment connecting cables. It is noted by those doing the installation work that it takes considerably longer, and is more difficult to cut through the Ashford Formula treated concrete than ordinary concrete, due to Ashford Formula’s hardening qualities.”

Robert C. Tilton
Senior Buyer

Kendall Distribution Services

Distribution | Atlanta, GA, USA

“We applied your Ashford Formula to the floor of our newly constructed and leased 227,000 square-foot building. Our primary purpose in using the Ashford Formula was to dustproof, seal, and harden the floor so as to make it as maintenance-free as possible. It is now almost two years later, and we have accomplished our purpose. The floor is virtually dust free, has developed a sheen that almost sparkles and is indeed maintenance-free. To have used poly-type sealers would have no doubt required at least two additional applications and further applications in the future. I congratulate you on a great product.”

R.A. Tillery
Regional Distribution/Traffic Manager

Casa de Cadillac

Automotive/Retail | Sherman Oaks, CA, USA

“Cleaning the floor areas in our Service Department is no problem as they have been treated with Ashford Formula. Any oil or grease dropped on the floor is merely wiped off with a cloth as there is penetration below the surface of the concrete. The Ashford Formula was applied when our building was finished in March 1949 and we still use only a mild soap on this to keep it clean. This Service Department has the easiest-to-maintain floor I have ever seen because of the Ashford Formula.”

William Hinman
General Service Manager

Coca Cola Bottling Company of New York

Manufacturing/Distribution | Long Island, NY, USA

“I am extremely happy with the results of the Ashford Formula installations.  After several years of service at our Smithtown, Long Island facility, the floor has continued to shine and remains dust-free and easily maintainable.  Comments from vieweres have been very positive, and the personnel at Coke are both impressed and satisfied.”

Jim Cicalo
Project Manager

Pennzoil Company

Manufacturing | Houston, TX, USA

“I am convinced that the Ashford Formula is the only way to go, and I don’t hesitate to give the formula an unqualified recommendation.  We have some areas in the hangar that are not Ashford treated, but have a conventional concrete sealer finish.  I intend to strip these surfaces and treat them with the Ashford Formula as soon as practical, primarily to reduce the slickness, but also to reduce the maintenance time that these surfaces require.

In closing, I’d like to say that I was quite skeptical, at first, regarding the claims made for your product.  I am totally convinced that it is, by far, the best possible treatment to use for any concrete floor.”

J. Keith McCoy
Chief of Maintenance

The J.M. Smucker Company

Food/Manufacturing/Distribution | Salinas, CA, USA

“The Ashford Formula has proven to be an exceptionally outstanding product in all aspects of its claims and has definitely been one of the elements which have contributed to the high quality of our floor slab, which displays virtually no signs of any undesirable cracking.  My compliments to the Curecrete Chemical Company for producing a product that actually works as intended.”

Clive Riddiford
Director, Corporate Engineering

Nu Skin International

Manufacturing | Provo, UT, USA

“I am happy to report to you that we are very pleased with the Ashford Formula, which was applied to our distribution center floor approximately 4 years ago.  The product which was applied during the construction of our facility, has provided us an attractive, durable surface which is easy to maintain.  In spite of considerable pedestrian, as well as forklift traffic, the floor has retained its appearance.  We are happy that we invested in your product and are pleased with its performance.”

Winn Wilcox
Director, Property Management

Livingston Health Care

Medical | USA

“Just a note to thank you and your organization for the clean, polished appearance of our facility floor.  After two years, and no additional maintenance we continue to get positive comments in regards to the Ashford Formula.  The longer the product is down and cleaned (scrubbed daily), the more polished and clean-looking the appearance.  In many cases we have promoted the Ashford Formula along with your organization’s name to associates.  Once again, thank you.”

Kevin Gillies
Branch Manager

Go to Curecrete Connect